Ginger Szechuan - 13.1% ABV. A sandy beach background.

Image with text

Pair text with an image to focus on your chosen product, collection, or blog post. Add details on availability, style, or even provide a review.

Button label

Ginger Szechuan

Written By Bray Denard, PhD
Disclaimer: This recipe is for personal use only.

Mead Master's Note

This ginger mead has intense aromatics that leap from the glass! Szechuan berries will give this sweet mead an increasingly drier finish the more you drink!

Cheers!

Batch Specifications

Batch Size - 1 gallon
ABV - 13.1%
Starting Gravity (SG) - 1.120
Final Gravity (FG) - 1.020
Style - Metheglin

Ingredients

  • Wildflower honey - 3 lbs
  • SafAle US-05 - 4g
  • Go-Ferm - 5g
  • Fermaid O - 7g, 3.5g per dose.
  • Potassium carbonate - 2g
  • Fermaid K - 1.9g
  • Potassium sorbate - 0.7g
  • Potassium metabisulfite - 0.4g

Spice Blend

  • Dried ginger root - 12g
  • Dried galangal - 12g
  • Red Szechuan berries - 3g
  • Green Szechuan berries - 3g
  • Marshmallow root - 3g
  • Dried lemon peel - 1.5g

Must Preparation

  1. To a sanitized two-gallon bucket, add the honey, first dose of Fermaid O, potassium carbonate, and Fermaid K.
  2. add 2 liters of water. We highly suggest using bottled water to avoid chloramines found in tap water.
    Do not use distilled water.
  3. Mix until all the honey is dissolved.
  4. Add water until slightly shy of the gallon mark.
  5. Add the spices from the spice blend to the bucket.

Yeast Preparation

  1. In a sanitized microwave-safe glass measuring jug, heat 125 ml of water to 101°F in a microwave.
  2. Mix Go-Ferm into the hot water.
  3. Sprinkle the yeast on top. Allow to sit for 5 minutes, then stir vigorously.
  4. After 10 minutes, add the yeast solution to the bucket.

Note: Do not allow the yeast to sit for longer than 15 minutes.

Fermentation

  1. Store the bucket in a temperature range of 65-75°F. Around 70°F is best.
  2. 48 hours after pitching the yeast, add the second dose of Fermaid O.
  3. Take a gravity reading every 3 days with a hydrometer until the gravity reaches 1.020 (10-14 days).
  4. Once fermentation has concluded, transfer the mead into a sanitized carboy.

Secondary

Stabilizing

  1. Cold crash in a refrigerator until clear. (Optional) Cold temperatures speed clearing, but clearing will occur without it.
  2. Rack the clear mead into a sanitized carboy.
  3. Add the potassium sorbate and potassium metabisulfite to the carboy and mix well. Allow to sit for a minimum of 24 hours, ideally until clear.
    Note: After stabilizing, there will be a harsh note resembling fusels in the mead for a few weeks. This is caused by the stabilizer and will age out as the stabilizer completes its protective purpose.
  4. A few days after mixing, cold crash in the refrigerator to speed clearing. (Optional)
  5. Bottle into sanitized bottles.

Tips & Tricks

  1. Place your carboy into a larger container to contain any potential spill over from fermentation.
  2. If your home is cold, the top back of the refrigerator is great for keeping the fermentation warm.
  3. A spray bottle of diluted sanitizer is great for sanitizing surfaces, especially hands.
  4. The first time you use a non-graduated bucket, add a gallon at a time and draw a line for each.