Liquid Gingerbread. A gingerbread man.

Liquid Gingerbread

Written By Bray Denard, PhD
Disclaimer: This recipe is for personal use only.

Mead Master's Note

Liquid Gingerbread was a tough mead to balance. The spices needed to be in the proper mix to simulate gingerbread, but not be too overpowering as a mead. Spices also needed to be balanced with the “bready” character imparted by the graham crackers and bread yeast. Honey choice was also critical to avoid clashing with the spices. It took a lot of test batches to get things just right!

Bread yeast may have a bad reputation to many mead makers, but if you want bread-like character, it cannot be beaten! In fact, it was a very clear winner over several standard yeasts when we were testing Liquid Gingerbread batches. It’s not usually my first choice, but it was the best yeast for this particular recipe.

Due to the complexity of balancing all these flavors, Liquid Gingerbread doesn’t really come together until the very end. When it does, it is really delicious! Enjoy!

Cheers!

Mead Specifications

Batch Size - 5 litres
ABV - 16%
Starting Gravity (SG) - 1.140
Final Gravity (FG) - 1.020
Style - Metheglin

Ingredients

  • Buckwheat honey - 1.9kg
  • Golden Syrup - 230g
  • Sahu (red) instant bread yeast - 10.6g
  • Go-Ferm - 13.3g
  • Fermaid O - 12.6g, 6.3g per dose.
  • Potassium carbonate - 2.6g
  • Fermaid K - 2.5g
  • Potassium sorbate - 0.9g
  • Potassium metabisulfite - 0.5g

Spice Blend

  • Dried ginger root - 8g
  • Dried galangal - 8g
  • Mexican cinnamon - 3.5g
  • Clove, whole - 3/4 clove
  • Ground nutmeg - 0.7g

Secondary Ingredients

  • Vanilla bean - 1 bean
  • Honey Maid graham crackers - 1.3 packs

Must Preparation

  1. To a sanitised ten-litre bucket, add the honey, golden syrup, first dose of Fermaid O, potassium carbonate, and Fermaid K.
  2. add 2 litres of room temperature water. We highly suggest using bottled water to avoid chloramines found in tap water.
    Do not use distilled water.
  3. Mix until all the honey is dissolved.
  4. Add water until slightly shy of the five-litre mark.
  5. Add the spices from the spice blend to the bucket.

Yeast Preparation

  1. In a sanitised microwave-safe glass measuring jug, heat 330 ml of water to 38°C in a microwave.
  2. Mix Go-Ferm into the hot water.
  3. Sprinkle the provided yeast on top. Allow to sit for 5 minutes, then stir vigorously.
  4. After 10 minutes, add the yeast solution to the bucket

Note: Do not allow the yeast to sit for longer than 15 minutes.

Fermentation

  1. Store the bucket in a temperature range of 10-30°C. Around 22°C is best.
  2. 48 hours after pitching the yeast, add the second dose of Fermaid O.
  3. Take a gravity reading every 3 days with a hydrometer until the gravity reaches 1.020 (10-14 days).
  4. Once fermentation has concluded, transfer the mead into a sanitised demijohn.

Secondary

  1. After terminal gravity, add the vanilla pod and graham crackers directly to the bucket.
  2. Allow to sit for 1 week, then rack into a sanitised demijohn.

Stabilising

  1. Cold crash in a fridge until clear. (Optional) Cold temperatures speed clearing, but clearing will occur without it.
  2. Rack the clear mead into a sanitised demijohn.
  3. Add the potassium sorbate and potassium metabisulfite to the demijohn and mix well. Allow to sit for a minimum of 24 hours, ideally until clear.
    Note: After stabilising, there will be a harsh note resembling fusels in the mead for a few weeks. This is caused by the stabiliser and will age out as the stabiliser completes its protective purpose.
  4. A few days after mixing, cold crash in the fridge to speed clearing. (Optional)
  5. Bottle into sanitised bottles.

Tips & Tricks

  1. Place your demijohn into a larger container to contain any potential spill over from fermentation.
  2. If your home is cold, the top back of the fridge is great for keeping the fermentation warm.
  3. A spray bottle of diluted sanitiser is great for sanitising surfaces, especially hands.
  4. The first time you use a non-graduated bucket, add 5 litres at a time and draw a line for each.